Print this Page
Fasson® 60# Archival Semi-Gloss FSC®/R5195/40#LF
Spec#
18559 REV 3/2023L
Facestock:
Fasson® 60# Semi-Gloss Elite™ FSC® is a bright, blue-white, 58#C1S, super calendered paper. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based flexo, UV flexo, and UV letterpress inks. It has improved smoothness, while maintaining strength for good converting and dispensing.
The FSC® certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
58.0# per ream ± 10%
(500 sheets 25" x 38")
Caliper:
0.0030 inches ± 10%
Tensile:
MD 34.6# per inch width
CD 16# per inch width
Tear:
MD 43 grams per sheet
CD 56 grams per sheet
Stiffness:
MD 128 mg
CD 71 mg
Adhesive:
Fasson® R5195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. Its consistent level of adhesion and long term removability make it suitable for applications on substrates such as glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter; however, use caution with stiff facestocks.
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+40° F
Service Temperature Range:
-65° F to +180° F
Typical Performance Data:
Tested with 60# C1S Paper at room temperature on standard lab panels.
Glass
Loop Tack:
Peel Adhesion:
1.0 lbs avg
0.9 lbs avg
Corrugated
Loop Tack:
Peel Adhesion:
0.5 lbs avg
0.6 lbs avg
Liner:
Fasson® 40#LF is an acid-free, lignin-free liner which adds to the overall stability of the total construction in roll to sheet applications. This liner has been designed for improved backside printability and will not flake or dust.
Basis Weight:
37.5# per ream +/- 10%
(500 sheets 24"x36")
Caliper:
0.00240 inches +/- 10%
Tensile:
MD 35# per inch width
CD 16# per inch width
Tear:
MD 30 grams per sheet
CD 34 grams per sheet
Total Construction Caliper
(approximate):
0.00620 inches ± 10%
Applications and Uses:
Classification of not being toxic (acute/chronic), corrosive, a skin/eye irritant, or strong sensitizer as defined in the 16 CFR 1500.3(b)(5), (7) – (9) (FHSA regulations), when used as intended or under circumstances involving reasonable, foreseeable misuse, based on a Toxicological Risk Assessment of the submitted product formulation by a Diplomate of the American Board of Toxicology (DABT).
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511