Print this Page
Fasson® 2 Mil Rainbow Polyester Seamless/S692N/50#SCK
Spec# 79579
Facestock:
Fasson® 2 Mil Seamless Rainbow Polyester has a holographic pattern designed to display a warm array of colors which glisten on a package, resulting in a dynamic consumer packaging experience. The face has been pre-treated for enhanced ink adhesion.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 32,714 psi
CD 32,714 psi


Tear:



Stiffness:

Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs

Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs










Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0060 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511