Print this Page
Fasson® 2 Mil White BOPP TC/S7000/40#BG
Spec# 79100
Facestock:
Fasson® 2 Mil White BOPP TC is a heat set, biaxially-oriented, co-extruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.



Basis Weight:
NA


Caliper:
0.00191 inches ± 10%


Tensile:
MD 18,500 psi
CD 35,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S7000 is a clear, general purpose permanent acrylic adhesive. It exhibits a balance of release properties to enable high speed converting and dispensing on increasingly-thinner substrates. Adhesion performance is designed for low surface energy substrates, enabling lasting performance on rigid and squeezable containers. It has been specifically designed to exhibit excellent wet-out characteristics and water-whitening resistance.

FDA compliance: Fasson® S7000 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
25° F


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations
Typical Performance Data: Tested with 2 mil clear polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

Target 1.3 lbs.
Target 1.3 lbs.

PET
Loop Tack:
Peel Adhesion:

Target 3.5 lbs.
Target 2.0 lbs.

Glass
Loop Tack:
Peel Adhesion:

Target 2.6 lbs.
Target 1.8 lbs.

Polypropylene
Loop Tack:
Peel Adhesion:

Target 1.4 lbs.
Target 1.5 lbs.





Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
36.24# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.002050 inches +/- 10%


Tensile:
N/A


Tear:
N/A
Total Construction Caliper (approximate): 0.004796 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511