Print this Page
Fasson® Trans-Therm® 1C FasCoverTM2/R128/40#SCK
Spec# 19342
Facestock:
Fasson® Trans-Therm® 1C FasCover™2 is an ultra smooth coated facestock which provides premium barcode printing for high and medium speed printers. Smudge resistance has been optimized for a coated paper, but caution is recommended with contact scanners. FasCover™2 is a black, opaque barrier coating for use as a correction/cover-up labelstock.



Basis Weight:
47.3# per ream ± 5%
(500 sheets 25" x 38")


Caliper:
0.0030 inches ± 10%


Tensile:
MD 28# per inch width
CD 17# per inch width


Tear:
MD 39 grams
CD 50 grams


Stiffness:
MD 82 mg
CD 49 mg

Adhesive:
Fasson® R128 is a general purpose removable rubber-based adhesive with high initial tack, internal strength, and stable adhesion. Fasson® R128 adhesive is recommended where clean removability is of primary importance. Can be used on a variety of substrates including glass, metal, plastic, and others. Fasson® R128 adhesive is suitable for applications where compliance with FDA 175.105 is required. This sections covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +120° F


Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

1.7 lbs
0.4-0.7 lbs


Treated LDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.3-0.6 lbs


Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.4-0.7 lbs











Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
42.40# per ream, ± 10%
(500 sheets 24" x 36")


Caliper:
0.00244 inches ± 10%


Tensile:
MD 39.70# per inch width
CD 14.70# per inch width


Tear:
MD 34.70 grams
CD 41.80 grams

Total Construction Caliper (approximate): 0.0623 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511