DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil Brushed Chrome Polyester TC/S8049A/90# EZ Liner
Spec#: 79654 DURABLE
FacestockFacestock physical properties
2 Mil Brushed Chrome Polyester TC has a rich brushed stainless steel surface appearance featuring excellent tear strength, heat resistance, dimensional stability, opacity and chemical resistance. Designed for printing with most flexographic, letterpress, and screen inks. Suitable for thermal transfer printing applications with select thermal transfer ribbons. Testing is strongly recommended prior to selecting final ink and ribbon choices
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Tensile:
ASTM D882
MD
26,000
psi
1,828
kg/sq cm
CD
20,000
psi
1,406
kg/sq cm
AdhesiveAdhesive physical properties
S8049 is a rubber hybridized acrylic adhesive with extremely high final adhesion on a wide variety of surfaces, including textured and low surface energy substrates. This adhesive has excellent chemical resistance.
Imperial Value
Units
Metric Value
Units
Type:
S8049 AE DURABLE
Caliper:
ASTM D1000
0.0013
inches
33.02
micron
Standard Coat Wt:
32
g/sq m
Minimum Appl Temp:
41
F
5
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
2.2
psi
0.0
LinerLiner physical properties
90# StaFlat® liner is a polyethylene-coated two sided paper stock. The embossed liner creates air egress channels in the adhesive.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0067
inches
170.1800
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
90.0
pounds
0.0
g/sq m
Tensile:
ASTM D882
MD
0.0
CD
0.0
Tear:
TAPPI T414
MD
0.0
CD
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
60
0.0103 inches +/- 10%

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
With Fasson Air Egress, air is able to flow freely between the product surface and the label, allowing air from outgassing and entrapment to escape quickly. Stray bubbles no longer have a chance to ruin the smooth application your label requires.

Applications and Uses
This product is suitable for a variety of durable labeling applications such as:
Printing and Converting
The top coat is designed for printing by most solvent, UV cured, and water-based flexographic inks; UV cured letterpress and rotary screen inks. Specially formulated inks are not normally necessary, however, testing is recommended prior to final ink system selections. The following press inks are UL Recognized at 150ºC (302ºF) without the need for overlaminations.. Color recognitions or restrictions and additional chemical resistances are noted for each ink system:
►Water-based flexogrphic inks with lube oil resistance: Environmental Inks & Coatings' "DR III FR" {recognized in all colors for indoor use, blue, black, and red for outdoor use}, "Aqua Plus" and "Aqua Film III" {recognized for indoor use in blue, black, and red, for outdoor use in blue and black}; Flint Ink's "HydroFilm ACE" {recognized in all colors for indoor and outdoor use}; and ACTEGA WIT, Inc. "Versifilm Plus ULF" {recognized in all colors for indoor and outdoor use}, and "Water Gloss" {recognized in all colors for indoor and outdoor use}.
► UV flexographic inks with lube oil and gas splash resistance: Environmental Inks & Coatings' "UltraFlex III SFR" {recognized in all colors for indoor and outdoor use}; Flint Ink's "Flexocure Sigma" {recognized in all colors for indoor use; blue and black for outdoor use, and blue, black, and red with gasoline}; and ACTEGA WIT, Inc. "PharmaFlex UV" {recognized in blue, black, and red for indoors and outdoor use}.
► UV ink jet: EFI Jetrion 4000 series {recognized with lube oil and gas splash resistance in all colors for indoor and outdoor use}.

Note: With most press inks, overlamination is required to meet the abrasion requirement for c-UL (CSA) recognition. At the 150ºC recognition temperature, overlaminations darken enough to hinder the readability of most yellow colored inks. If overlamination is desired with UL or c-UL recognition, seek recognition at a lower maximum use temperature.

Also suitable for thermal transfer printing with select ribbons and printers. Consult product recognition files or the Fasson Thermal Transfer Ribbon Guide for specific recommendations. This product can be die cut and stripped at high speeds on most web-fed presses. Sample labels in a variety of shapes have been successfully dispensed and applied with standard labeling systems.


RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel

2. Aluminum

3. ABS Plastic

4. Polypropylene

5. HDPE

6. LDPE
35.4

27.5

33.9

40

27.7

24
38.7

30.1

37.1

43.8

30.3

26.3
89.9

68.2

57.4

47.5

32.3

24.2
98.4

74.6

62.9

52

35.4

26.4
92.8

110.2

38.5

92.3

47

20.2
101.6

120.7

43.2

101

51.5

22.1
90.72

80.5

36.3

63.7

31.4

17.6
99.3

88.1

39.7

69.7

34.3

19.3


Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511