Print this Page
Fasson® Dull Silver Laminated Foil/C2500/40#SCK
Spec# 15316 - REV 10/2019F
Facestock:
Fasson® Dull Silver Laminated Foil is an aluminum foil laminated to a white kraft base sheet with an acrylic topcoating for printability. Good printing with solvent and water-base flexo. Not recommended for imprinting.



Basis Weight:
72# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.0036 inches ± 10%


Tensile:
MD 35# per inch width
CD 19# per inch width


Tear:
MD 50 grams per sheet
CD 60 grams per sheet


Stiffness:
MD 250 mg
CD 160 mg
Adhesive:
Fasson® C2500 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, treated glass, and corrugated cardboard. The 35° F minimum application temperature covers the vast majority of prime label requirements. Fasson® C2500 features excellent high speed/wide web converting characteristics. Fasson® C2500 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+35° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: Using 60# Semi-Gloss Elite™ facestock, at room temperature.


HDPE
Loop Tack:
Peel Adhesion:

4.71 lbs
3.72 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

4.60 lbs
2.62 lbs

Glass - PE treated
Loop Tack:
Peel Adhesion:

2.34 lbs
2.34 lbs

Shrink film
Loop Tack:
Peel Adhesion:

2.88 lbs
2.31 lbs

Recycled corrugated
Loop Tack:
Peel Adhesion:

1.57 lbs
1.81 lbs
Liner:
Fasson® 40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:
41.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.00245 inches ±10%


Tensile:
MD 41# per inch width
CD 17# per inch width


Tear:
MD 37 grams
CD 45 grams
Total Construction Caliper (approximate): 0.00685 inches ± 10%

Applications and Uses
This product is suitable for a wide variety of labeling applications where excellent print quality and adhesive performance are critical. Fasson® C2500 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511