Print this Page
Fasson® NTC Laser CodeTM Drum Label/S4600/79#MF
Spec# 78026
Facestock:
Fasson® 4 mil white non-topcoated flexible vinyl. Requires a converter-applied topcoat for ink and toner receptivity.



Basis Weight:
n/a


Caliper:
0.0034 inches ± 10%


Tensile:
MD 3,500 PSI
CD 3,000 PSI


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S4600 is a clear general purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to + 300° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.77 lbs
4.1 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs


Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
4.3 lbs


HDPE
Loop Tack:
Peel Adhesion:

N/A
4.6 lbs

Liner:
79#MF is a machine-finished bleached kraft paper liner. Used primarily for roll-to-sheet applications, including laser. Features good back printability.



Basis Weight:
78# per ream ± 10%


Caliper:
0.0046 inches ± 10%


Tensile:
MD 33# per inch width
CD 53# per inch width


Tear:
MD 60 grams
CD 75 grams

Total Construction Caliper (approximate): 0.0088 inches ± 10%

Applications and Uses: This product has passed British Standard 5609 (BS 5609:1986) Section 2 testing, which is necessary for International Maritime dangerous Goods (IMDG) certification.

Printing and Converting: To maximize on-press efficiencies when converting Fasson® laser film product constructions, material should be run with Grain Direction (machine direction) perpendicular to the Feed Direction of laser printing. For a comprehensive list of recommendations for laser products, please read this set of on-line converting tips before purchasing this product: http://label.averydennison.com/content/dam/averydennison/lpm/na/en/product%20families/Rapid-Roll/fasson%20rapid-roll%20laser%20tag/Laser%20Inkjet%20Landing%20Page/LaserInkJet-printingtips.pdf

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511