Print this Page
Fasson® DemandJet
TM
500HG WBIJ/R195A*/1.2 Mil Polyester
Spec#
54195
Facestock:
DemandJet™ 500HG FSC® is a white paper featuring a high-gloss finish specially engineered for use in water based, on-demand ink jet printers. Specifically engineered for use in on-demand inkjet printers utilizing water-based dye and pigment ink technology. It couples excellent inkjet print quality with fast ink dry time and smudge resistance. The surface accepts flexo spot colors and varnishes after digital printing. It is ideal for applications which print variable information, in conjunction with full color graphics.
The FSC® certification ensures that products come from well-managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
53.50# per ream ± 10%
(500 sheets 24"x36")
Caliper:
0.00409 inches ± 10%
Tensile:
MD 31.20# per inch width
CD 26.40# per inch width
Tear:
MD 44.60 grams per sheet
CD 41.30 grams per sheet
Stiffness:
MD 192.40 milligrams
CD 118.30 milligrams
Adhesive:
Fasson® R195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build-up. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. Fasson® R195 is ideal for applications requiring clean removability over long periods of time. It is suitable for use on a wide range of substrates including glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter, although caution should be exercised with stiff facestocks. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+40° F
Service Temperature Range:
-65° F to +180° F
Typical Performance Data:
Tested with 60# C1S Paper at room temperature on standard lab panels.
Glass
Loop Tack:
Peel Adhesion:
0.9 lbs avg.
1.1 lbs avg.
Recycled Corrugated
Loop Tack:
Peel Adhesion:
0.4 lbs avg.
0.5 lbs avg.
HDPE
Loop Tack:
Peel Adhesion:
0.7 lbs avg.
1.0 lbs avg.
Loop Tack:
Peel Adhesion:
Loop Tack:
Peel Adhesion:
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00607 inches ± 10%
Note:
R195A designates a lower than standard adhesive coat weight.
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511
