Print this Page
Fasson® 3.7 Mil Smudgeproof Kimdura®/S4600/50#SCK
Spec# 79572
Facestock:
Fasson® 3.7 Mil Smudgeproof Kimdura® is a white synthetic paper designed to be compatible with both thermal transfer and flexograpic printing methods. It has good chemical resistance, tear strength, and cold temperature performance to -65° F. It is certified for Section 2 of BS 5609, and also certified for BS 5609, Section 3 with most suppliers' recommended ribbons for drum labeling.



Basis Weight:
n/a


Caliper:
0.0039 inches ± 10%


Tensile:
MD 11.90 # per inch
CD 13.40 # per inch


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S4600 is a clear general purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to + 300° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.77 lbs
4.1 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs


Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
4.3 lbs


HDPE
Loop Tack:
Peel Adhesion:

N/A
4.6 lbs

Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams

Total Construction Caliper (approximate): 0.0079 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511