DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil White Polyester TC/S8049/50#SCK ABC
Spec#: 79453 Durable
FacestockFacestock physical properties
2 Mil White Polyester is a homogeneously pigmented white facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. The topcoat is designed to provide excellent printability with most UV and water based Flexo printing, along with compatibility to most TT ribbons
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Tensile:
ASTM D882
MD
21,300
PSI
1,497
kg/cm2
CD
28,400
PSI
1,997
kg/cm2
AdhesiveAdhesive physical properties
S8049 is a rubber hybridized acrylic adhesive with extremely high final adhesion on a wide variety of surfaces, including textured and low surface energy substrates. This adhesive has excellent chemical resistance.
Imperial Value
Units
Metric Value
Units
Type:
S8049 Durable
Caliper:
ASTM D1000
0.0018
inches
45.72
micron
Standard Coat Wt:
45
g/sq m
Minimum Appl Temp:
41
F
5
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
6.2
lb/in
0.0
LinerLiner physical properties
50# SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Used for standard roll-to-roll and fanfolded applications. For best results, fanfolded products must be processed in a controlled environment of 40-50% RH. Not recommended for sheeted applications. Features good back printability.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.0260
microns
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
57.7
lb/ream
92.3
g/sq m
Tensile:
ASTM D882
MD
51.0
lb/in
224.4
N/25 mm
CD
22.7
lb/in
99.8
N/25 mm
Tear:
TAPPI T414
MD
2.0
ounces
57.1
grams
CD
2.7
ounces
76.7
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
45
 .0068 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
This product is briefly repositionable, and then adhesion increases to a very high ultimate peel strength. 
S8049 products are engineered to be resistant to harsh chemicals commonly found in the automotive and electronics industries.

Printing and Converting
The top coat is designed for printing by most solvent, UV cured, and water-based flexographic inks; UV cured letterpress, Digital and rotary screen inks. Specially formulated inks are not normally necessary, however, testing is recommended prior to final ink system selections.
Note: With most press inks, overlamination is required to meet the abrasion requirement for c-UL (CSA) recognition. At the 150ºC recognition temperature, overlaminations darken enough to hinder the readability of most yellow colored inks. If overlamination is desired with UL969,c-UL or CSA recognition, seek recognition at a lower maximum use temperature.

Also suitable for thermal transfer printing with select ribbons and printers. Consult product recognition files or the Fasson Thermal Transfer Ribbon Guide for specific recommendations.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel

2. Aluminum

3. ABS Plastic

4. Polypropylene

5. HDPE

6. LDPE
112.32

97.44

131.04

116.8

65.6

95.2
122.69

106.5

143.13

127.84

71.60

104.06
139.04

138.88

134.28

124.8

117.12

128.8
151.85

151.81

146.7

136.37

128

140.73
140.16

136.32

102.40

128.48

47

67.36
153.11

148.9

111.88

140.37

20.23

73.65
139.04

130.88

65.76

107.52

125.28

60.32
152.01

143.01

71.87

117.46

136.84

65.94




Compliance Recognition: UL, C-U
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. Acrylic PCP*

    3. Alkyd Enamel Paint

    4. Aluminum

    5. Epoxy Paint

    6. Epoxy PCP*

    7. Galvanized Steel

    8. Polyester Paint

    9. Polyester PCP*

    10. Poly (Urethane) PCP*

    11. Stainless Steel

    12. Unsat Thermoset Polyester

    13. Nylon (polyamide)

    14. Phenolic

    15. ABS Plastic

    16. Polyphenylene Oxide

    17. Polystyrene

    18. Polycarbonate

    19. Polypropylene
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
302

302

302

302

302

302

302

302

302

302

302

302

212

212

176

176

176

176

176
150

150

150

150

150

150

150

150

150

150

150

150

100

100

80

80

80

80

80
I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O
Recognized Ribbons: Armor "AXR7+", Armor "AXR8", Armor "AXR600", Astro Med Inc "R-5", Astro Med "RF", Astro Med "RY", Coding Prds "5940", DNP "R-300", DNP "R-510", DNP "TR4070", DNP "Signature Series Resin", Iimak "SP-410", Iimak "SP-330", Iimak "Primemark", Intermec "TMX 1500", Intermec "TMX 3200", ITW "B324", Kurz "K300", Kurz "K500", Kurz "K501", NCR "Promark 3", NCR "Pacesetter", NCR "Ultra V", NCR "Perma Max", NCR "K3", Ricoh "B110C", Ricoh "B110CR", Ricoh "120EC", Sato Corp. "Premier 1", Zebra "5095", Zebra "5175", Zebra "5463", Zebra "5555", and others., Fujicopian FTX303, Fujicopian FTX303N, Fujicopian TTM-164, Fujicopian FTX304, Fujicopian TTM-46



Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for labeling materials
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Electrostatic Coated Metal C

    2. Electrostatic Coated Metal D

    3. Metals

    4. Plastics Group I

    5. Plastics Group II

    6. Plastics Group III

    7. Plastics Group IV

    8. Plastics Group V

    9. Plastics Group VI

    10. Plastics Group VII

    11. Plastics Group VIII
0

0

0

0

0

0

0

0

0

0

0





















302

302

302

212

212

176

176

176

176

176

176
150

150

150

100

100

80

80

80

80

80

80
I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O
Recognized Ribbons: Armor "AXR7+", Armor "AXR8", Armor "AXR600", Astro Med "RY", DNP "R-300", DNP "R-510", DNP "TR4070", DNP "Signature Series Resin", Kurz "K500", NCR "Promark 3", Ricoh "B110C", Ricoh "B110CR", Sato Corp. "Premier 1", Zebra "5100", and others.


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511