DURABLE PORTFOLIO
Product Data Sheet
Fasson® 3 Mil Matte White Synthetic Paper/S333/50#SCK
Spec#: 75570 - DURABLE
FacestockFacestock physical properties
3 Mil Matte White Synthetic Paper is a matte finished opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of a film. Suitable for flexographic, letterpress, screen, and thermal transfer printing.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0030
inches
76.20
micron
Tensile:
ASTM D882
MD
15,000
psi
1,055
kg/sq cm
CD
21,000
psi
1,476
kg/sq cm
AdhesiveAdhesive physical properties
S-333 An excellent general purpose industrial grade clear permanent acrylic adhesive. Features high initial tack to most high and medium surface energy substrates. High shear strength for low ooze characteristics.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0008
inches
20.32
micron
Standard Coat Wt:
26
g/sq m
Minimum Appl Temp:
25
F
-4
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
35.8
oz/inch
39.4
N/100 mm
LinerLiner physical properties
50# SCK is a bleached, super calendered paper stock with very good die-cutting and matrix stripping properties. Used for standard roll-to-roll applications. Not recommended for sheeting.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
54.5
lbs/ream
87.2
g/sq m
Tensile:
ASTM D882
MD
48.0
lbs/inch
211.2
N/25 mm
CD
26.0
lbs/inch
114.4
N/25 mm
Tear:
TAPPI T414
MD
1.8
ounces
51.1
grams
CD
2.1
ounces
59.6
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
40
0.0070 inches (7 mils; 177.8 microns)

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
Printing and Converting
Can be thermal transfer printed with wax, wax/resin combination, and resin based ribbons on standard thermal transfer printing equipment. The smooth matte surface accepts most flexographic, letterpress, and screen inks. Testing is recommended prior to selecting any thermal transfer ribbon or press ink for production. Can be die cut and converted at high speeds on most roll fed rotary printing equipment. labels in a variety of shapes and sizes have been successfully dispensed on standard pressure sensitive label dispensers.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following adhesion data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Aluminum

2. Stainless Steel

3. ABS Plastic

4. Polypropylene

5. HDPE

6. LDPE
41.5

32.8

47.0

18.7

13.0

9.4
45.7

36.1

51.7

20.6

14.3

10.3
58.8

61.0

61.0

12.7

19.7

19.7
64.7

67.1

67.1

14.0

21.6

21.7
59.1

57.6

56.3

26.6

21.1

11.6
65.1

63.4

62.0

29.2

23.2

12.7
78.5

70.4

43.5

19.2

33.6

13.8
86.3

77.4

47.9

21.1

36.9

15.2

Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel.


Adhesion to Stainless Steel
Visual
Edge
Chemical
oz/in
N/100mm
Appearance
Penetration mm
1. 70% IPA

2. Tide® Detergent

3. Engine Oil (10W30)

4. Water

5. Ammonia - pH 11

6. 409® Cleaner

7. Toluene

8. Brake Fluid

9. Reference Fuel C

10. Kerosene K1

11. Heptane
45.5

38.5

44.9

26.5

14.4

19.0

17.5

49.5

22.2

40.7

44.6
50.0

42.4

49.4

29.2

15.8

20.9

19.3

54.5

24.5

44.8

49.1
No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change

No Change
1.9

0

0.1

0

3.2

0

1.8

0

5.2

0.4

0



Compliance Recognition: UL, C-U
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Aluminum

    2. Galvanized Steel

    3. Stainless Steel

    4. Porcelain

    5. Acrylic Paint

    6. Alkyd Enamel

    7. Epoxy Paint

    8. Polyester Paint

    9. Nylon

    10. ABS Plastic

    11. Melamine

    12. Phenolic

    13. Polyphenylene Oxide

    14. Polystyrene

    15. Unsat Thermoset Polyester

    16. Polyethylene
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40


-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40


176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

140
80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

60
I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I
Recognized Ribbons: Armor "AXR7+", DNP "R-510", DNP "TRX-55", Iimak "SP-330", Iimak "SP-575", Iimak "Primemark", Iimak "R2Prime", ITW "B324", Ricoh "B110C", Zebra "5095", Zebra "5555", and others., Fujicopian FTX303, Fujicopian FTX303N, Fujicopian TTM-164, Fujicopian FTX100, Fujicopian TRX-21, Japan Pulp & Paper "Resin 1", Sony "TR4065



Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for labeling materials
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Metals

    2. Plastics Group I

    3. Plastics Group II

    4. Plastics Group III

    5. Plastics Group V

    6. Plastics Group VI

    7. Plastics Group VIII

    8. Plastics Group IV
0

0

0

0

0

0

0

0















176

176

176

176

176

176

176

140
80

80

80

80

80

80

80

60
I

I

I

I

I

I

I

I
Recognized Ribbons: Armor "AXR7+", ITW "B324", and others.


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511