Print this Page
Fasson® 60# U.L. Litho FSC®/FDA815S/50#SCK
Spec#
74873
Facestock:
Fasson® 60# U.L. Litho FSC® is a coated litho paper. Good solvent/water-based flexo and screen printing. Fair UV flexo and letterpress printing. Not recommended for offset printing. Good converting characteristics.
The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain.
Basis Weight:
62.5# per ream ± 10%
(500 sheets 25" x 38")
Caliper:
0.00346 inches ± 10%
Tensile:
MD 28.12# per inch width
CD 12.92# per inch width
Tear:
MD 47.7 grams per sheet
CD 50.95 grams per sheet
Stiffness:
N/A
Adhesive:
Fasson® FDA815S is a clear adhesive featuring good initial tack, moderate shear, minimum cold flow, and the ability to adhere to a wide variety of substrates.
FDA Compliance:
- Meets the requirements of 16CFR 1500.41 for direct skin contact.
- Meets the requirements of Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F
Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data:
Tested with 2 Mil Clear Polyester at room temperature on standard lab panels.
Stainless Steel
Loop Tack:
Peel Adhesion:
1.6 lbs
3.8 lbs
Aluminum
Loop Tack:
Peel Adhesion:
N/A
3.4 lbs
Polypropylene
Loop Tack:
Peel Adhesion:
N/A
2.1 lbs
HDPE
Loop Tack:
Peel Adhesion:
N/A
1.0 lbs
ABS Plastic
Loop Tack:
Peel Adhesion:
N/A
3.9 lbs
Liner:
50# SCK is a bleached supercalendered kraft stock featuring high internal strength, toughness and tear resistance. Ideally suited for marginal punching, perforating and fanfolding.
Basis Weight:
55# per ream ±10%
(24"X36" 500 sheets)
Caliper:
0.0032 inches ±10%
Tensile:
MD 39# per inch width
CD 20# per inch width
Tear:
MD 48 grams per sheet
CD 58 grams per sheet
Total Construction Caliper
(approximate):
0.00746 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511