Print this Page

Fasson® Trans-Therm® 1C FSC®/AT20N/40#SCK
Spec# 13600 - REV 1/6/20L
Facestock:
Fasson® Trans-Therm® 1C FSC® is an ultra-smooth, coated facestock which provides premium barcode printing for high-speed and medium-speed printers. This product is suitable for use in applications where high quality barcode printing is critical. Smudge resistance has been optimized for a coated paper, but caution is recommended with contact scanners. Fasson® Trans-Therm® 1C FSC® offers reduced mottle flexographic floodcoating and high-speed, wide-web converting.

The FSC® certification ensures that products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.




Basis Weight:

47.30 # per ream
(500 sheets 25" x 38")


Caliper:

0.0029 inches ± 10%


Tensile:

MD 26# per inch width
CD 17# per inch width


Tear:

MD 40 grams per sheet
CD 40 grams per sheet


Stiffness:

MD 170 mg
CD 100 mg

Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold- temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:

Emulsion Acrylic


Minimum Application Temperature:

-20° F -29° C


Service Temperature Range:

-65° F to +200° F


Typical Performance Data: Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:


2.7 lbs
1.6-3.1 lbs


HDPE (Non-Treated)
Loop Tack:
Peel Adhesion:


1.9 lbs
0.8-1.0 lbs


Polypropylene
Loop Tack:
Peel Adhesion:


2.2 lbs
1.4-2.1 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:


1.8 lbs
1.0-1.4 lbs


Glass
Loop Tack:
Peel Adhesion:


2.9 lbs
1.1-2.0 lbs

Liner:
Fasson® 40#SCK is a bleached calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:

41.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:

0.0024 inches ±10%


Tensile:

MD 40# per inch width
CD 19# per inch width


Tear:

MD 35 grams
CD 40 grams

Total Construction Caliper (approximate): 0.0061 inches ± 10%


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511