Print this Page
Fasson® Trans-Therm® 1C FasCoverTM2/AT20/40#CK
Spec# 13601-OBSOLETE
Facestock:
Fasson® Trans-Therm® 1C FasCover™2 is an ultra-smooth coated facestock with a black backside primer for increased opacity. This facestock provides premium barcode printing in high and medium speed printers, while offering excellent smudge-resistance.



Basis Weight:
47.3# per ream ± 5%
(500 sheets 25"x38")


Caliper:
0.0029 inches ± 10%


Tensile:
MD 26# per inch width
CD 17# per inch width


Tear:
MD 40 grams
CD 40 grams


Stiffness:
MD 170 mn
CD 100 mn
Adhesive:
Fasson® AT20 is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20 is an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
-20° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
2.2-3.0 lbs

Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
1.1-2.1 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

2.9 lbs
1.8-2.4 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.6 lbs
1.1-2.1 lbs; pulled fiber

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs
Liner:
40#CK liner is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.1# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0024 inches ± 10% target


Tensile:
MD 35.6# per inch width target
CD 13.9# per inch width target


Tear:
MD 34.3 grams target
CD 44.7 grams target
Total Construction Caliper (approximate): 0.0061 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511