Print this Page
Fasson® 70# Bright White Felt Wet-Strength FSC®/Z3338B/1.2 Mil Polyester
Spec# 53331
Facestock:
Fasson® 70# Bright White Felt Wet-Strength FSC® is a bright white paper that features a felt finish and a wet-strength additive to increase resistance to tearing or shriveling in moist environments. It was created to provide a good print surface for distinguished wine, beverage, and gourmet food labels.

The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain. Qualification is subjective and customer perception might differ. Since label designs vary, we encourage end-use application testing of all materials.



Basis Weight:
70# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0062 inches ± 10%


Tensile:
MD 35 pounds per inch width


Tear:
MD 84 grams per sheet
CD 90 grams per sheet


Stiffness:
MD 550 mg (target)
CD 280 mg (target)
Adhesive:
Fasson® Z3338 is a cold/wet adhesive engineered to perform in heavy condensation environments without sacrificing good diecutting and stripping properties. Because of its cold/wet application properties, Z3338 is an ideal adhesive for improved ice bucket and cold box performance. Fasson® Z3338 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F -29° C


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Tested with 60# Cast Gloss at room temperature on standard lab panels.


Stainless steel
Loop Tack:
Peel Adhesion:

2.3 lbs
1.0-1.5 lbs

Treated HDPE
Loop Tack:
Peel Adhesion:

1.8 lbs
0.8-1.5 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

2.0 lbs
1.4-2.1 lbs

Recycled corrugated
Loop Tack:
Peel Adhesion:

1.5 lbs
1.0-1.5 lbs

Glass
Loop Tack:
Peel Adhesion:

2.2 lbs
1.1-2.0 lbs
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00118 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00818 inches ± 10%


Note: Z3338B is a heavy adhesive coat weight.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511