Print this Page
Fasson® 2 Mil Metallized BOPP TC/S7000/40#BG
Spec# 79101 - REV 5/2022A
Facestock:
Fasson® 2 Mil Metallized BOPP TC is a topcoated, biaxially oriented polypropylene which provides mirror-like reflectivity. This product can be diecut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended that dies be tooled specifically for this construction. This product offers excellent dispensing characteristics.

Printable by web screen, UV letterpress, and flexographic. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.



Basis Weight:
n/a


Caliper:
0.0020 inches ± 10%


Tensile:
MD 30,450 psi
CD 24,650 psi


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S7000 is a clear, general purpose permanent acrylic adhesive. It exhibits a balance of release properties to enable high speed converting and dispensing on increasingly-thinner substrates. Adhesion performance is designed for low surface energy substrates, enabling lasting performance on rigid and squeezable containers. It has been specifically designed to exhibit excellent wet-out characteristics and water-whitening resistance.

Fasson® S7000 utilizes AD CleanFlake™ technology, however, due to the metallized facestock used in this construction this specification is not recyclable in the current recycling streams.

Below is a link to the APR Letter Recognizing this construction with PET & HDPE recyling:
https://plasticsrecycling.org/images/Design-Guidance-Tests/APR-RES-LBL-1-ps-label-resource.pdf

FDA compliance: Fasson® S7000 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations


Typical Performance Data: Tested with 2 mil clear polypropylene facestock at room temperature on standard lab panels.



HDPE
Loop Tack:
Peel Adhesion:

Target 1.6 lbs
Target 1.1 lbs


PET
Loop Tack:
Peel Adhesion:

Target 3.3 lbs
Target 1.5 lbs


Glass
Loop Tack:
Peel Adhesion:

Target 2.3 lbs
Target 1.1 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

Target 1.5 lbs
Target 1.1 lbs






Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
36.24# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.002050 inches +/- 10%


Tensile:
N/A


Tear:
N/A

Total Construction Caliper (approximate): 0.0048866 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511