Print this Page
Fasson® Trans-Therm® 1C FSC®/C2580/40#SCK
Spec# 54023-REV 3/2024F
Facestock:
Fasson® Trans-Therm® 1C FSC® is an ultra-smooth, coated facestock which provides premium barcode printing for high-speed and medium-speed printers. This product is suitable for use in applications where high quality barcode printing is critical. Smudge resistance has been optimized for a coated paper, but caution is recommended with contact scanners. Fasson® Trans-Therm® 1C FSC® offers reduced mottle flexographic floodcoating and high-speed, wide-web converting.

The FSC® certification ensures that products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
47.30 # per ream
(500 sheets 25" x 38")


Caliper:
0.0029 inches ± 10%


Tensile:
MD 26# per inch width
CD 17# per inch width


Tear:
MD 40 grams per sheet
CD 40 grams per sheet


Stiffness:
MD 170 mN
CD 100 mN
Adhesive:
Fasson® C2580 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, especially low surface energy plastics. This adhesive is designed to perform for low temperature applications. Fasson® C2580 features excellent high-speed, wide-web converting characteristics.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data:


Stainless Steel
Loop Tack:
Peel Adhesion:

4.86 lbs
4.98 lbs

HDPE
Loop Tack:
Peel Adhesion:

2.97 lbs
1.97 lbs

LDPE
Loop Tack:
Peel Adhesion:

Not Tested
2.46 lbs

PP
Loop Tack:
Peel Adhesion:

4.37 lbs
3.49 lbs

PP Tarp
Loop Tack:
Peel Adhesion:

1.36 lbs
1.85 lbs
Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.30# per inch width
CD 14.80# per inch width


Tear:
MD 32.60 grams
CD 40.80 grams
Total Construction Caliper (approximate): + `0.0061 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511