Print this Page
Fasson® Semi-Gloss EliteTM FSC®/R195/50#MF
Spec# 01629
Facestock:
Fasson® 58# Semi-Gloss FSC® is a bright, blue-white C1S, super calendered paper. It is designed to bridge the gap between low-end and high-end process printing, up to 175 line screen. This sheet prints well with water-based flexo, UV flexo, and UV letterpress inks. It has improved smoothness, while maintaining strength for good converting and dispensing.

The FSC® certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
58# per ream +/- 10%
(Ream size 25" x 38")


Caliper:
0.0030 inches +/- 10%


Tensile:
MD 35# per inch
CD 16# per inch


Tear:
MD 43 grams per sheet
CD 56 grams per sheet


Stiffness:
MD 128 mg
CD 71 mg

Adhesive:
Fasson® R195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build-up. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. Fasson® R195 is ideal for applications requiring clean removability over long periods of time. It is suitable for use on a wide range of substrates including glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter, although caution should be exercised with stiff facestocks. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +180° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Glass
Loop Tack:
Peel Adhesion:

0.9 lbs avg.
1.1 lbs avg.


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.4 lbs avg.
0.5 lbs avg.


HDPE
Loop Tack:
Peel Adhesion:

0.7 lbs avg.
1.0 lbs avg.



Loop Tack:
Peel Adhesion:





Loop Tack:
Peel Adhesion:



Liner:
50#MF is a coated stock which adds to the overall stability of the total construction in roll-to-sheet applications.



Basis Weight:
51.5# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0034 inches ± 10%


Tensile:
MD 29# per inch width
CD 19# per inch width


Tear:
MD 55 grams per sheet
CD 55 grams per sheet

Total Construction Caliper (approximate): .0073 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511