Print this Page
Fasson® 2.3 Mil White BOPP TC/R195/65#MF
Spec# 17311
Facestock:
Fasson® 2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by UV and water-based flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.



Basis Weight:
N/A


Caliper:
0.0023 inches ± 10%


Tensile:
MD 26,825 psi
CD 22,475 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® R195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build-up. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. Fasson® R195 is ideal for applications requiring clean removability over long periods of time. It is suitable for use on a wide range of substrates including glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter, although caution should be exercised with stiff facestocks. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +180° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Glass
Loop Tack:
Peel Adhesion:

0.9 lbs avg.
1.1 lbs avg.


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.4 lbs avg.
0.5 lbs avg.


HDPE
Loop Tack:
Peel Adhesion:

0.7 lbs avg.
1.0 lbs avg.



Loop Tack:
Peel Adhesion:





Loop Tack:
Peel Adhesion:



Liner:
65#MF is a bleached, coated-two-side liner. Suitable for diecutting and stripping at moderate press speeds. This product is used primarily for sheeted applications where dimensional stability and layflat are essential.



Basis Weight:
65# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0043 inches ±10%


Tensile:
N/A


Tear:
N/A

Total Construction Caliper (approximate): 0.0074 inches ±10%

Applications and Uses:
Classification of not being toxic (acute/chronic), corrosive, a skin/eye irritant, or strong sensitizer as defined in the 16 CFR 1500.3(b)(5), (7) – (9) (FHSA regulations), when used as intended or under circumstances involving reasonable, foreseeable misuse, based on a Toxicological Risk Assessment of the submitted product formulation by a Diplomate of the American Board of Toxicology (DABT).

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511