Print this Page
Fasson® 2 Mil White Printable Polyester PB/S730/1.5 Mil Clear Polyester/S730/50#SCK
Spec# 72998
Facestock:

Fasson® 2 Mil White Print-Treated Polyester is a pigmented, white semi-gloss film facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. The print treatment is designed to enhance printability with a variety of printing processes.


Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 21,000 psi
CD 31,000 psi


Tear:
MD 20grams
CD NA


Stiffness:
MD 42mN
CD 55.1mN
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: , 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
n/a


Caliper:
0.00142 inches ± 6%


Tensile:
MD 22,000 psi lower limit
CD 22,000 psi lower limit


Tear:
n/a
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: , 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
50#SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Used for standard roll-to-roll and fanfolded applications. For best results, fanfolded products must be processed in a controlled environment of 40-50% RH. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
54.5# per ream ±10%
(500 sheets 24" X 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 48# per inch width
CD 26# per inch width


Tear:
MD 50 grams
CD 58 grams
Total Construction Caliper (approximate): .00822 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511