Print this Page
Fasson® 2.6 Mil White BOPP/FA20B/40#SCK
Spec# 14688
Facestock:
2.6 Mil White BOPP NTC is a corona-treated, white, biaxially-oriented polypropylene film for rigid containers, where durability is needed.



Basis Weight:
n/a


Caliper:
0.0026 inches ± 10%


Tensile:
MD 13,500 psi (target)
CD 27,500 psi (target)


Tear:
n/a


Stiffness:
MD 22 mg (target)

Adhesive:
Fasson® FA20B is a permanent adhesive developed to combine the optimum in cold-temperature performance with good diecutting and stripping characteristics. FA20B is a heavier than normal coat weight of adhesive, designed to improve adhesion to difficult surfaces. Fasson® FA20B is noted for its outstanding performance on waxy corrugated cardboard. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot Melt Rubber


Minimum Application Temperature:
0° F


Service Temperature Range:
-65° F to +160° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



























Liner:
Fasson® 40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:
41.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.00245 inches ±10%


Tensile:
MD 41# per inch width
CD 17# per inch width


Tear:
MD 37 grams
CD 45 grams

Total Construction Caliper (approximate): 0.00585 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511