DURABLE PORTFOLIO
Product Data Sheet
Fasson® 2 Mil Clear Print-Treated Polyester/R143/50#SCK
Spec#: 40756
FacestockFacestock physical properties
2 Mil Clear Print-Treated Polyester is a highly transparent film facestock featuring excellent tear strength, heat resistance, dimensional stability and chemical resistance. Print treatment is designed to enhance printability with a variety of printing processes.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Tensile:
ASTM D882
MD
33,500
psi
2,355
kg/sq m
CD
33,500
psi
2,355
kg/sq m
AdhesiveAdhesive physical properties
R143 is a visually clear acrylic based removable adhesive with versatile performance properties. It features superior cohesive strength for high creep resistance, moderately high tack and adhesion, yet clean repositionability over extended contact periods on most substrates. This adhesive complies with the European Directive 2002/95/EC of January 27, 2003, for the restriction of use of certain hazardous substances.
Imperial Value
Units
Metric Value
Units
Type:
Solvent acrylic
Caliper:
ASTM D1000
0.0009
inches
22.86
microns
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
250
F
121
C
Loop Tack Stainless
Steel: PSTC11
20.0
oz/inch
22.0
N/100 mm
LinerLiner physical properties
50# SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Used for standard roll-to-roll and fanfolded applications. For best results, fanfolded products must be processed in a controlled environment of 40-50% RH. Not recommended for sheeted applications. Features good back printability.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
3.1900
mil
0.0000
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
57.7
lbs
0.0
g/sq m
Tensile:
ASTM D882
MD
51.0
lb/in
0.0
CD
22.7
lb/in
0.0
Tear:
TAPPI T414
MD
57.1
gms
0.0
CD
76.5
gms
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
35
.0061 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
This product is suitable for a variety of durable labeling applications such as:
Printing and Converting
The surface treatment is designed for printing by flexography with most solvent and some water based inks. Specially formulated inks are normally not needed, however, testing is recommend prior to final ink selection.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511