Print this Page
Fasson® SCANbackTM/S730/50#SCK ABC
Spec# 73739
Facestock:
Fasson® SCANback™ is a 5.5 mil retro-reflective polyester film facestock designed to reflect light back to its source. It is inherently printable with rotary press printing and thermal transfer processes. SCANback™ has a reflectivity value of 50 candelas per lumen when tested per ASTM E810; -4 degree entrance angle, 0.2 degree observation angle.

SCANback™ can be used in applications requiring long-range scannable barcodes, such as warehouse shelving and material tracking. It is an excellent choice for variable information signage and labels. SCANback™ also offers eyecatching appeal in promotional and kiddie sticker applications.

CAUTION: Please note that during diecutting, the glass bead technology used to produce Fasson® SCANback™ retro-reflective facestock will act as an abrasive agent. This will shorten cutting/perforating tool life expectancies. Please consult your die manufacturer for insight on tooling specifics prior to purchase.





Basis Weight:
N/A


Caliper:
0.0055 inches ± 10%


Tensile:
N/A


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+45° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
50#SCK is a bleached, super calendered paper stock with very good diecutting and matrix stripping properties. Supplied with an anti-block coating ("ABC") on the backside of the liner. ABC controls adhesive and label transfer to the backside of the liner in finished, wound rolls. This liner should not be used in fanfolded label applications, and is not recommended for back printability.



Basis Weight:
54# per ream ±10%
(24 "x 36" 500 sheets)


Caliper:
0.0032 inches ± 10%


Tensile:
MD 48# per inch width
CD 26# per inch width


Tear:
MD 50 grams
CD 58 grams
Total Construction Caliper (approximate): 0.0095 ± 10%

Notes: "ABC" is an abbreviation for anti-block coating, which is applied to the back of the liner to mitigate label blocking. Scanback has a 6 splice maximum in 3,600 feet (minimum of 50 feet between splices).

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511