Print this Page
Fasson® 2 Mil Clear BOPP TC/FA20/50#SCK
Spec# 12919
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 14,000 psi
CD 32,000 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® FA20 is a permanent adhesive developed to combine the optimum in cold-temperature performance with good diecutting and stripping characteristics. Fasson® FA20 was developed specifically for use in freezer and cold temperature applications. This adhesive will develop a permanent bond to most packaging films and materials when applied at temperatures as low as 0° F. Fasson® FA20 is noted for its outstanding performance on waxy corrugated cardboard. It is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
0° F


Service Temperature Range:
-65° F to +160° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

1.4 lbs
0.7-1.0 lbs


Treated HDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.7-0.9 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

1.3 lbs
0.7-0.9 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.7 lbs
0.4-0.6 lbs


Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.6-0.8 lbs

Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 52# per inch width
CD 24# per inch width


Tear:
MD 46grams
CD 56 grams

Total Construction Caliper (approximate): 0.0060 inches ±10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511