Print this Page
Fasson® Matte Litho FSC®/R128/50#SCK
Spec# 01667 - REV 6/2021A
Facestock:
Fasson® 60# Matte Litho FSC® is a 60# paper which features a dull, matte-coated print surface. Good printing with water-based flexo, UV flexo, UV Inkjet (UVIJ), screen, and solvent ink systems. Not recommended for offset printing. This facestock can be imprinted.

The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain.




Basis Weight:
62.5# per ream ± 10%


Caliper:
0.00346 inches ± 10%


Tensile:
MD 28.12# per inch width
CD 12.92# per inch width


Tear:
MD 47.70 grams per sheet
CD 50.95 grams per sheet


Stiffness:

Adhesive:
Fasson® R128 is a general purpose removable rubber-based adhesive with high initial tack, internal strength, and stable adhesion. Fasson® R128 adhesive is recommended where clean removability is of primary importance. Can be used on a variety of substrates including glass, metal, plastic, and others. Fasson® R128 adhesive is suitable for applications where compliance with FDA 175.105 is required. This sections covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +120° F


Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

1.7 lbs
0.4-0.7 lbs


Treated LDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.3-0.6 lbs


Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.4-0.7 lbs











Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 52# per inch width
CD 24# per inch width


Tear:
MD 46grams
CD 56 grams

Total Construction Caliper (approximate): 0.0076 inches ± 10%


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511