Product Data Sheet
FassonŽ Rapid-RollŽ 35# PPMOPP 330
Spec# 75742
Revised 10.19.2020



Description:
FassonŽ Rapid-RollŽ 35# PPMOPP 330 is a heavyweight coated paper face with metallized polypropylene used for higher-grade print jobs in primary packaging where more package stiffness is desired. Foil-less pouch stock can have better package durability in comparison to foil substrates. Structure requires flexible packaging inks & varnishes for form, fill and seal process. Contact your ink supplier for specific recommendations. Fit for use testing required.

Construction consists of 35# C1S/7# LDPE/Heat Sealable MOPP.

None of our paper/PE/mPET/PE products are sterilized with ethylene oxide treatment nor are they irradiated.
Compliance:
According to the manufacturer of the 35# C1S/7#LDPE/Heat Sealable MOPP, the 35# C1S layer has compliance with CFR Title 21, Sections 176.180, 176.170, 176.200, 176.210, 176.260, 176.300 and 178.3520.

The 7# LDPE layer has compliance with CFR Title 21 Section 177.1520 (c) (2.2). This resin may be used in contact with all types of food as defined in Table 1, 21 CFR Section 176.170 (c) at use conditions B-H as defined in Table II, 21 CFR 176.170 (c).

The MOPP layer has compliance with CFR Title 21 Section 177.1520. The Tie Layer complies with CFR Title 21 Section 177.1330 (a) – Ionomeric resins subject to the limitations and requirements therein.



Properties:
Physical Property
Typical Value
Test Method
Basis Weight
Caliper
Yield		52.0 lbs/ream
3.30 mils
8.330 msi/lb		T410
T411
ASTM D 4321
Layer Property
Results
Typical Value
Test Method
Exterior Layer Performance Properties
Dimension Stability
Flex Crack Resistance
Ink Recommendation
Stiffness / Flexibility		Excellent
Good
Traditional Paper Inks
Average		N/A
N/A
N/A
N/A		N/A
N/A
N/A
N/A
Barrier Layer Performance Properties
Chemical Resistance
Light
Moisture Vapor Trans Rate
Oxygen Vapor Trans Rate		Average
Excellent
.0009
2.0		N/A
N/A
grams / 100 sq. in./24 hours.
cc / 100 sq. in. / 24 hours		N/A
N/A
N/A
N/A
Sealant Layer Performance Properties
Caulk & Flow
Hot Tack
Coefficient of Friction
Puncture Resistance
Seal Initiation Temperature
Seal Strength
Seal through Contamination
Burst Strength		Average
Good
.35
9.5
260
700
Poor
36		N/A
N/A
Kinetic Seal to Seal
Pounds
°F
gm/in.@350°F/40 PSI / 0.5 sec.
N/A
PSI		N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A





Heat Seal Curve


"Heat Seal curve reflects sealing with one side heated platen"



Target Markets:
Dry food packages that require high quality flexo/process printed graphics. P/P/F/P has a coated paper facestock that is suitable for flexo- process-graphics.



End Uses:
Dry food packaging such as gravy and soup mixes that require high quality flexo/process graphics. Larger volume/weight packages requiring a more durable package. Stand up pouches for dry mixes that require superior package rigidity. Better puncture resistance for hard particulate (noodles, etc.).




Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH



Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511