Fasson® Trans-Therm® 1C is an ultra smooth coated facestock which provides premium barcode printing for high and medium speed printers. This sheet will also print on UV letterpress equipment and offers some water resistance. Smudge resistance has been optimized for a coated paper, but caution is recommended with contact scanners.

	Basis Weight:	49.5# per ream ± 10% (500 sheets 25" x 38")
	Caliper:	0.0032 inches ± 10%
	Tensile:	MD 30# per inch width CD 18# per inch width
	Tear:	MD 44 grams CD 50 grams
	Stiffness:	MD 105 mg CD 65 mg

Adhesive:
Fasson® S490 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Displays excellent diecutting and stripping characteristics, especially on wide-web applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+25° F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels

	Stainless Steel Loop Tack: Peel Adhesion:	4.0 lbs 2.0 lbs - tear
	Treated HDPE Loop Tack: Peel Adhesion:	3.4 lbs 1.8 lbs - tear
	Polypropylene Loop Tack: Peel Adhesion:	3.0 lbs 1.5 lbs - tear
	Recycled Corrugated Loop Tack: Peel Adhesion:	1.9 lbs 1.3 lbs - tear
	Glass Loop Tack: Peel Adhesion:	3.7 lbs 2.5 lbs - tear

Liner:
A 1.5 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.

	Basis Weight:	N/A
	Caliper:	0.0015 inches ±10%
	Tensile:	MD 32,000 PSI
	Tear:	N/A

Adhesive:
Fasson® S490 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Displays excellent diecutting and stripping characteristics, especially on wide-web applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+25° F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels

	Stainless Steel Loop Tack: Peel Adhesion:	4.0 lbs 2.0 lbs - tear
	Treated HDPE Loop Tack: Peel Adhesion:	3.4 lbs 1.8 lbs - tear
	Polypropylene Loop Tack: Peel Adhesion:	3.0 lbs 1.5 lbs - tear
	Recycled Corrugated Loop Tack: Peel Adhesion:	1.9 lbs 1.3 lbs - tear
	Glass Loop Tack: Peel Adhesion:	3.7 lbs 2.5 lbs - tear

Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. NOTE: Liner color variation may occur.

	Basis Weight:	43.50# per ream ±10% (24" x 36" 500 sheets)
	Caliper:	0.0031 inches ± 10%
	Tensile:	MD 35 pounds per inch width CD 13 pounds per inch width
	Tear:	MD 35 grams CD 50 grams

Total Construction Caliper (approximate): 0.0094 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

label.averydennison.com

Label and Packaging Materials-North America 8080 Norton Parkway Mentor, OH 44060 800-944-8511