Print this Page
Fasson® Direct-Therm 200HD FSC®/R128/40#SCK
Spec# 01535 - REV 6/2021A
Facestock:
Fasson® Direct-Therm 200HD FSC® is a smooth white paper with a medium sensitivity thermal coating. A special low ion topcoating provides protection for the thermal layer and maximizes print head life. This product is suitable for use in a wide variety of direct thermal label printers, especially those typically used in weigh-scale applications. Fasson® Direct-Therm 200HD FSC® is resistant to blood, fats, oils, plasticizers found in PVC, alcohols, solvents, and vinegar.

The FSC® certification ensures that products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.

Fasson recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.



Basis Weight:
50# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 33# per inch width
CD 16# per inch width


Tear:
MD 43 grams per sheet
CD 47 grams per sheet


Stiffness:
MD 83 mg
CD 43 mg

Adhesive:
Fasson® R128 is a general purpose removable rubber-based adhesive with high initial tack, internal strength, and stable adhesion. Fasson® R128 adhesive is recommended where clean removability is of primary importance. Can be used on a variety of substrates including glass, metal, plastic, and others. Fasson® R128 adhesive is suitable for applications where compliance with FDA 175.105 is required. This sections covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +120° F


Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

1.7 lbs
0.4-0.7 lbs


Treated LDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.3-0.6 lbs


Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.4-0.7 lbs











Liner:
40#SCK is a bleached, super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40.70# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0025 inches ± 10%


Tensile:
MD 34# per inch width
CD 22# per inch width


Tear:
MD 32 grams
CD 34 grams

Total Construction Caliper (approximate): 0.0065 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511