PDS

Fasson® Adhesive Data Sheets


Enter Adh # or Keyword

Click on arrows to sort
Adh #<> Adhesive Description
R340030Fasson® R3400 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. R3400 complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components into the food; or, (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
R350031Fasson® R3500 is a specially formulated acrylic adhesive designed for ease of removability from plastic packaging while maintaining good peel performance. Fasson® R3500 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
R42332Fasson® R423 is a removable adhesive featuring long term removability, and excellent diecutting and stripping characteristics. This adhesive is not recommended for automobile window sticker applications.
R519533Fasson® R5195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. Its consistent level of adhesion and long term removability make it suitable for applications on substrates such as glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter; however, use caution with stiff facestocks.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
R542334Fasson® R5423 is a removable adhesive featuring long term removability, and excellent diecutting and stripping characteristics.
S100035Fasson® S1000 is a clear permanent adhesive specifically designed to exhibit excellent wet-out characteristics on clear films. Frequently used in the prime label market where squeezability and clear labeling are critical. Meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S100R36Fasson® S100R is a permanent adhesive which is removable in minimum 100° F water. Developed with good initial tack and ultimate adhesion, S100R can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100° F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, or as long as 5 minutes. Where removal is required, this adhesive is recommended for use on HDPE, polypropylene, poly vinyl chloride (PVC), polyester, Lexan®, stainless steel, and glass. We do not recommend it for use with film facestocks (i.e., polypropylene, polystyrene), due to a potential surface interaction which could cause the loss of water removability. This adhesive exhibits excellent diecutting and stripping properties.

FDA Compliance:  Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105).  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

Lexan® is a registered trademark of General Electric Company.
S200137Fasson® S2001 is a clear permanent adhesive designed for prime film labeling where exceptional optical clarity is required. Suited to clear squeezable and clear facestock applications, S2001 provides short-term repositionability, and good ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.
S24638Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications where FDA Compliance with: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S250139Fasson® S2501 is a versatile, general purpose permanent adhesive designed for excellent adhesion to corrugated cardboard and superior adhesion to plastics. Excellent initial tack without sacrificing high speed converting. For use with all information printing technologies, including laser. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S260040Fasson® S2600 is an emulsion acrylic adhesive with moderate tack and adhesion. This specialty adhesive is designed with a "wash-away" feature completely dissolving within seconds in normal tap water.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S283141Fasson® S2831 is a high performance acrylic based adhesive featuring high ultimate peel values. It was specifically designed to resist edge attack by solvents and chemicals used in printed circuit board manufacturing processes. Peel values increase dramatically after the printed circuit board is heated above 392° F (200° C).
S302542Fasson® S3025 is an acrylic based permanent adhesive featuring excellent adhesion and tack to corrugated and paper substrates, having moderate adhesion to non polar substrates. This adhesive is dispersible, offering characteristics for water-washoff label applications. Fasson® S3025 meets TAPPI Standard UM213 for repulpability.
S327243Fasson® S3272 is a high performance acrylic based adhesive featuring high ultimate peel values. It was specifically designed to resist edge attack by solvents and chemicals used in printed circuit board manufacturing processes. Peel values increase dramatically after the printed circuit board is heated above 392° F (200° C).
S33344Fasson® S333 is an excellent, general purpose industrial grade clear adhesive. Features high initial tack, ultimate adhesion and low adhesive ooze.
S333B45Fasson® S333B is an excellent general purpose industrial grade clear acrylic adhesive. Featurs high initial tack and ultimate adhesion to a wide variety of substrates.
S460046Fasson® S4600 is a clear general purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.
S47547Fasson® S475 is a clear adhesive offering high initial tack and cold temperature properties when applied to most packaging films. Features good UV resistance for outdoor use.
S475048Fasson® S4750 is a general purpose acrylic adhesive featuring high adhesion and good mandrel hold to small diameter substrates. Fasson® S4750 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.
S49049Fasson® S490 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Displays excellent diecutting and stripping characteristics, especially on wide-web applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S490050Fasson® S4900 is a clear, general purpose permanent adhesive with good initial tack and ultimate adhesion to a wide variety of substrates. Designed exclusively for industrial labeling applications.
S490M51Fasson® S490M is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Provides excellent diecutting and stripping characteristics, especially on wide-web applications.
S517N52Fasson® S517N is a super-clear, solvent acrylic, permanent adhesive. It provides high initial tack, high shear, minimal cold flow, and ultimate adhesion to a wide variety of substrates, including glass. Designed to withstand pasteurization. Meets the following FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S660053Fasson® S6600 is a highly aggressive tackified emulsion acrylic permanent adhesive with high adhesion to a wide variety of substrates including low surface energy substrates such as polypropylene for battery casings, HDPE and LDP. Meets the requirements of FDA 21 CFR 175.105.
S692N54Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.
S700055Fasson® S7000 is a clear general purpose permanent acrylic adhesive which exhibits a balance of release properties to enable high speed converting and dispensing on increasingly thinner substrates. Adhesion performance is designed for low surface-energy substrates enabling lasting performance on squeezable containers. Specifically designed to exhibit excellent wet out characteristics, water-whitening resistance and up to 24 hour removability from even high surface energy containers like PET when paired with certain facestock choices.

FDA compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S717P56Fasson® S717P is a permanent acrylic adhesive offering high initial tack, minimal cold flow, and excellent mandrel holding power. It performs well on a variety of substrates, including plastics and glass. Its excellent holding power prevents edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S717P provides excellent diecutting and stripping characteristics, as well as automatic labeling features. It is suitable for use in applications where sterilization methods are used and ideal for critical Pharmaceutical applications requiring extended component change notification. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
S72757Fasson® S727 is a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces. Fasson® S727 has excellent holding power, which helps prevent edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S727 provides excellent diecutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used.
S73058Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.

S800159Fasson® S8001 is a high performance, clear permanent emulsion acrylic pressure sensitive adhesive with balanced adhesion to a wide variety of substrates, including low surface energy plastics, engineering grade plastics, bare, coated, or painted metals, including powder coat and enamel paints. It features medium tack and excellent chemical and UV resistance for outdoor industrial applications.

Fasson® S-8001 adhesive compositionally complies with Title 21 Code of Federal Regulations (C.F.R.) Section 175.105 ("Adhesives"). Compliance with this regulation permits the use of this adhesive in applications provided the adhesive is separated from food by a functional barrier or 1) with dry food, the quantity of the adhesive does not exceed the limits of good manufacturing practice, or 2) with fatty and aqueous foods, the quantity of the adhesive that contacts the food does not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.




HOME | PRODUCTS | SERVICES | CUSTOMER TOOLS | NEWS | ABOUT US | CONTACT US

©1998-2012 Avery Dennison Corporation. All rights reserved.
Legal Notice.       Privacy Statement.      Terms & Conditions.