Print this Page
Fasson® MaxFlexTM Bright Silver FSC®/S246B/40#SCK
Spec# 53298
Facestock:
Fasson® 56# MaxFlex™ Bright Silver FSC® is a premium finish metallized paper with acrylic topcoat. This facestock offers very good flexo printing, and fair printing with letterpress, screen, and offset methods. Compatible with UV ink systems. In-house testing is always recommended prior to final ink selection. Qualification is subjective, and customer perception might differ. As label designs vary, we encourage end-application testing of all materials

FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain.

Fasson® and all other Avery Dennison brands, product names and codes are trademarks of the Avery Dennison Corporation. All other brands and product names are trademarks of their respective owners. All statements, technical information and/or recommendations in this document are based on tests believed to be reliable but do not constitute a guarantee or warranty by Avery Dennison.



Basis Weight:
56.0# per ream ± 10%
(500 sheets 25"x38")


Caliper:
0.0026 inches ± 10%


Tensile:
MD 25# per inch width
CD 13# per inch width


Tear:
MD 40 grams per sheet
CD 45 grams per sheet


Stiffness:
MD 55 mg
CD 35 mg
Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 60# C1S paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear

HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear

Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear





Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.30# per inch width
CD 14.80# per inch width


Tear:
MD 32.60 grams
CD 40.80 grams
Total Construction Caliper (approximate): 0.0058 inches ± 10%

Note:  S246B is a heavy adhesive coatweight.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511