Print this Page
Fasson® SPXTRA PB/S246/40#SCK/S246/50#SCK
Spec# 01698
Facestock:

Fasson® SP-XTRATM is a coated, latex-impregnated sheet designed for moderate speed converting.  Slightly stiffer and offers better smudge resistance than Smudgeproof Pli-A-Print®. Printable by laser.


Basis Weight:
56.4# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0038 inches ± 10%


Tensile:
MD 28.3# per inch width
CD 20# per inch width


Tear:
MD 58 grams per sheet
CD 59 grams per sheet


Stiffness:
MD 120 mg
CD 65 mg

Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F

Typical Performance Data: , 60# C1S paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear


HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear


Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear


Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear






Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
42# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.0025 inches ± 10%


Tensile:
MD 38# per inch width
CD 20# per inch width


Tear:
MD 36 grams
CD 41 grams

Adhesive:
Fasson® S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. Fasson® S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot melt rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +160° F

Typical Performance Data: , 60# C1S paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

6.2 lbs
3.0 lbs-tear


HDPE
Loop Tack:
Peel Adhesion:

4.3 lbs
2.2 lbs-tear


Polypropylene
Loop Tack:
Peel Adhesion:

4.5 lbs
3.0 lbs-tear


Glass
Loop Tack:
Peel Adhesion:

6.0 lbs
2.6 lbs-tear






Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 39# per inch width
CD 20# per inch width


Tear:
MD 48 grams
CD 58 grams

Total Construction Caliper (approximate): 0.0111 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511