Print this Page
Fasson® Direct-Therm 300HD FSC®/50# EDP Weld
Spec# 19894 - Restricted to Paxar
Facestock:
Fasson® Direct-Therm 300HD FSC® is a smooth, bright white paper with a high-sensitivity thermal coating.  It is designed for use with low voltage printheads to minimize printhead wear, and is also ideal for use with high-speed thermal printers. 

Direct-Therm 300HD FSC® features include excellent resistance to water, rubbing alcohol, and other contaminants.  Fasson highly recommends this material to be imaged and used within three to six months of receipt (FIFO inventory method) for the finest quality product.

The FSC® certification ensures that the products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.



Basis Weight:
51.3# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 27.48# per inch width
CD 17# per inch width


Tear:
MD 40.67 grams
CD 40.77 grams


Stiffness:
MD 71.72 mg
CD 42.53 mg
Adhesive:
Fasson® S2501 is a versatile, general purpose permanent adhesive designed for excellent adhesion to corrugated cardboard and superior adhesion to plastics. Excellent initial tack without sacrificing high speed converting. For use with all information printing technologies, including laser. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+38°F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: 50# Uncoated Paper at room temperature on standard lab panels


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8 - 1.1 lbs
0.6 - 0.8 lbs

Rigid HDPE
Loop Tack:
Peel Adhesion:

1.6 - 2.4 lbs
1.1 - 1.6 lbs

Treated LDPE
Loop Tack:
Peel Adhesion:

1.1 - 1.6 lbs
1.2 - 1.6 lbs

PVC Film
Loop Tack:
Peel Adhesion:

2.1 lbs
2.5 - 2.7 lbs

Glass
Loop Tack:
Peel Adhesion:

3.1 - 3.3 lbs
1.9 lbs
Liner:
Fasson® 50# DSX™ is a 50# bright white, high strength EDP paper specially designed for enhanced continuous laser imaging and high speed converting. Excellent smudge resistance. Prints well offset; fair printing solvent and water-based flexo and screen. Not recommended for letterpress printing or with UV ink systems.



Basis Weight:
48# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.00337 inches ± 10%


Tensile:
MD 24# per inch width
CD 17.5# per inch width


Tear:
MD 55 grams per sheet
CD 50 grams per sheet
Total Construction Caliper (approximate): 0.00737 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511