Print this Page
Fasson® 3 Mil Clear Polyester/S3000/2.5Mil Matte Clear Valtuff WELD/S3000/44#PK - Weld Construction
Spec# 74977
Facestock:

Fasson® 3 Mil Clear Polyester NTC is a highly transparent film featuring excellent tear strength, heat resistance, dimensional stability, and chemical resistance. This film is primarily used for clear applications and is not print treated.


Basis Weight:
n/a


Caliper:
0.0030 inches ± 10%


Tensile:
MD 30,000 psi
CD 30,000 psi


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S3000 is a clear permanent adhesive designed for prime labeling, including squeezable and clear facestock applications. Designed for low ooze and high temperature resistance. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +176° F subject to facestock limitations

Typical Performance Data: , 2 Mil Clear Polyester Facestock at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.0 lbs
4.3 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs


PET Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
4.0 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.0 lbs


Glass
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs

Liner:
Fasson® Valtuff® is a 2.5 mil clear oriented and cross-laminated HDPE. It provides excellent strength, elongation, and barrier characteristics. Additional surface preparation is required to make this material print-receptive.

Valtuff® is a registered trademark of Valeron® Strength Films.



Basis Weight:
N/A


Caliper:
0.0025 inches ± 10%


Tensile:
MD 8,300 PSI
CD 8,300 PSI


Tear:
N/A

Adhesive:
Fasson® S3000 is a clear permanent adhesive designed for prime labeling, including squeezable and clear facestock applications. Designed for low ooze and high temperature resistance. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +176° F subject to facestock limitations

Typical Performance Data: , 2 Mil Clear Polyester Facestock at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.0 lbs
4.3 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs


PET Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
4.0 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.0 lbs


Glass
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs

Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding.



Basis Weight:
43.50# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0031 inches ± 10%


Tensile:
MD 35 pounds per inch width
CD 13 pounds per inch width


Tear:
MD 35 grams
CD 50 grams

Total Construction Caliper (approximate): 0.0102 inches ±10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511