Print this Page
Fasson® 2 Mil Custom Blue Void Polyester TC/S727/50#SCK ABC
Spec# Clintrak ECR - RESTRICTED
Facestock:
Fasson® 2 Mil Custom Blue Void Polyester TC is a blue-colored polyester incorporating a custom pattern release layer for tamper evidence. This facestock is specially topcoated to enhance flexographic, UV flexographic, letterpress, screen, and thermal transfer printing.



Basis Weight:
n/a


Caliper:
0.0020 inches ± 10%


Tensile:
MD 27,000 psi target
CD 34,000 psi target


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S727 is a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces. Fasson® S727 has excellent holding power, which helps prevent edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S727 provides excellent diecutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-65° F to +250° F
Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.5 lbs
2.6 lbs-tear

Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
2.6 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

2.1 lbs
1.5-1.8 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs
1.1-1.3 lbs-Pulled Fiber

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
2.6 lbs-tear
Liner:
50#SCK is a bleached, super-calendered kraft paper stock with very good die cutting and matrix stripping properties. Used primarily for roll-to-roll and fanfold label applications. Not recommended for sheeted applications. Test suitability for use in fanfold label applications due to ABC ("anti-block coating") applied to backside of the liner to control adhesive and label transfer in finished, wound rolls. Backside printable with many water-based flexo inks.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0060 inches ± 10%

NOTE:  "ABC" refers to anti-block coating on the backside of the liner.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511