Print this Page
Fasson® 2 Mil White Polyester Film C1S WRIJ/S2001/50#MF RB
Spec#
77688 - RESTRICTED TO AVERY OFFICE PRODUCTS
Facestock:
Fasson® 2 Mil White Polyester Film coated one side with water resistant inkjet receptive coating. This water resistant Ink Jet topcoating will add an additional 1.5mil to the total facestock caliper.
Basis Weight:
Caliper:
0.00197 inches ± 10%
Tensile:
MD 18,000 psi
CD 24,000 psi - 31,900 psi
Tear:
Stiffness:
Adhesive:
Fasson® S2001 is a clear permanent adhesive designed for prime film labeling where exceptional optical clarity is required. Suited to clear squeezable and clear facestock applications, S2001 provides short-term repositionability, and good ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+25° F
Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data:
2 Mil Clear Polyester Facestock at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
2.5 lbs
2.2 lbs
Aluminum
Loop Tack:
Peel Adhesion:
N/A
2.8 lbs
Flame Treated Polypropylene
Loop Tack:
Peel Adhesion:
N/A
2.3 lbs
Flame Treated HDPE
Loop Tack:
Peel Adhesion:
N/A
1.4 lbs
Glass
Loop Tack:
Peel Adhesion:
N/A
2.4 lbs
Liner:
50#MF Rough Back is a coated-two-side liner with rough back for easy feeding through most desktop and high-`speed laser printers. This liner is used primarily for sheeted applications where dimensional stability and layflat are essential.
Basis Weight:
50# per ream ±10%
(500 sheets 24" x 36"
Caliper:
0.0034 inches ± 10%
Tensile:
MD 25# per inch width
CD 13# per inch width
Tear:
MD 75 grams
CD 100 grams
Total Construction Caliper
(approximate):
0.0767 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511