Print this Page
Fasson® Trans-Therm® C FSC®/AT20N/40#SCK/AT20N/40#SCK
Spec# 54442
Facestock:

Fasson® Trans-Therm® C FSC® is an ultra-smooth coated facestock which provides premium barcode printing for high- and medium-speed printers. Smudge-resistance has been optimized for a coated paper, but caution is recommended with contact scanners.

The FSC® certification ensures that products come from well-managed forests which provide environmental, social, and, economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.


Basis Weight:
40# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.00285 inches ± 10%


Tensile:
MD 26# per inch width
CD 17# per inch width


Tear:
MD 42 grams
CD 42 grams


Stiffness:
MD 140 mg
CD 90 mg

Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Acrylic Emulsion


Minimum Application Temperature:
-20°F or -29°C


Service Temperature Range:
-65°F to +200°F

Typical Performance Data: , Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

2.0-2.8
1.5-2.7


NonTreated HDPE
Loop Tack:
Peel Adhesion:

1.4-2.2
0.6-1.4


PP
Loop Tack:
Peel Adhesion:

1.8-2.6
1.0-1.8


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8-1.5
0.8-1.6


Glass
Loop Tack:
Peel Adhesion:

2.0-2.8
0.7-1.5

Liner:
40#SCK is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0024 inches ±10%


Tensile:
MD 39# per inch width
CD 19# per inch width


Tear:
MD 32 grams
CD 37 grams

Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Acrylic Emulsion


Minimum Application Temperature:
-20°F or -29°C


Service Temperature Range:
-65°F to +200°F

Typical Performance Data: , Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

2.0-2.8
1.5-2.7


NonTreated HDPE
Loop Tack:
Peel Adhesion:

1.4-2.2
0.6-1.4


PP
Loop Tack:
Peel Adhesion:

1.8-2.6
1.0-1.8


Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.8-1.5
0.8-1.6


Glass
Loop Tack:
Peel Adhesion:

2.0-2.8
0.7-1.5

Liner:
40#SCK is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
40# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0024 inches ±10%


Tensile:
MD 39# per inch width
CD 19# per inch width


Tear:
MD 32 grams
CD 37 grams

Total Construction Caliper (approximate): 0.00925 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511