Print this Page
Fasson® 2 Mil Clear BOPP TC/S900/44#PK
Spec# 77939 - Obsolete
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 14,000 psi
CD 32,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S900 is a clear, emulsion acrylic, general purpose permanent adhesive which complies with FDA regulations for indirect food contact (CFR 175.105). It has good initial tack and ultimate adhesion to a wide variety of substrates.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester Facestock at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.4 lbs

Glass
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polyproplene
Loop Tack:
Peel Adhesion:

N/A
2.5 lbs

PVC
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0 lbs
Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding.



Basis Weight:
43.50# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0031 inches ± 10%


Tensile:
MD 35 pounds per inch width
CD 13 pounds per inch width


Tear:
MD 35 grams
CD 50 grams
Total Construction Caliper (approximate): 0.0059 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511