Print this Page
Fasson® 2 Mil White BOPP TC/S517N/.92 Mil Polyester
Spec# ECR 19-I785 - Restricted to MCC
Facestock:
Fasson® 2 Mil White BOPP TC is a heat set, biaxially-oriented, co-extruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.



Basis Weight:
NA


Caliper:
0.00191 inches ± 10%


Tensile:
MD 18,500 psi
CD 35,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S517N is a super-clear, solvent acrylic, permanent adhesive. It provides high initial tack, high shear, minimal cold flow, and ultimate adhesion to a wide variety of substrates, including glass. Designed to withstand pasteurization. Meets the following FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Solvent Acrylic


Minimum Application Temperature:
+45° F


Service Temperature Range:
-40° F to +300° F, subject to facestock limitations.
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Glass
Loop Tack:
Peel Adhesion:

N/A
2.7 lbs

LDPE
Loop Tack:
Peel Adhesion:

N/A
0.9 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs
Liner:
A 0.92 mil clear polyester liner which is designed primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00092 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00363 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511