Print this Page
Fasson® 60# Semi-Gloss EliteTM/R128/44#PK
Spec# 19206
Facestock:
Fasson® 60# Semi-Gloss Elite™ is a bright, blue-white, 60# C1S, super calendered paper. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based Flexo, UV Flexo, and UV Letterpress inks. It has improved smoothness while maintaining strength for good converting and dispensing.



Basis Weight:
58.5# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0031 inches ± 10%


Tensile:
MD 32# per inch width
CD 16# per inch width


Tear:
MD 47 grams per sheet
CD 55 grams per sheet


Stiffness:
MD 110 mg
CD 60 mg
Adhesive:
Fasson® R128 is a general purpose removable rubber-based adhesive with high initial tack, internal strength, and stable adhesion. Fasson® R128 adhesive is recommended where clean removability is of primary importance. Can be used on a variety of substrates including glass, metal, plastic, and others. Fasson® R128 adhesive is suitable for applications where compliance with FDA 175.105 is required. This sections covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+10° F


Service Temperature Range:
-65° F to +120° F
Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

1.7 lbs
0.4-0.7 lbs

Treated LDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.3-0.6 lbs

Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.4-0.7 lbs










Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding.



Basis Weight:
43.50# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0031 inches ± 10%


Tensile:
MD 35 pounds per inch width
CD 13 pounds per inch width


Tear:
MD 35 grams
CD 50 grams
Total Construction Caliper (approximate): 0.0070 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511