Print this Page
Fasson® 2.5 Mil White Supreme Tube Film/S692N/1.2 Mil Polyester
Spec#
TBD - Developmental White Supreme Tube Film- PROJECT CANCELLED 7/2018
Facestock:
Fasson® 2.5 Mil White Supreme Tube Film is ideal for full-squeeze applications. Its robust film and shrink characteristics combine to make this suitable for a wide variety of container shapes.
MD 2% Secant Modulus: 167,800 psi
CD 2% Secant Modulus: 65,500 psi
Opacity: >85%
Basis Weight:
n/a
Caliper:
0.0025 inches
Tensile:
MD 22,700 psi
CD 2,500 psi
Tear:
n/a
Stiffness:
n/a
Adhesive:
Fasson® S692N is a clear, general-purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wet-out characteristics and short-term removability. S692N meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur
Type:
Emulsion acrylic
Minimum Application Temperature:
+23° F
Service Temperature Range:
-20° F to +200° F, subject to facestock limitations
Typical Performance Data:
HDPE
Loop Tack:
Peel Adhesion:
1.2 - 1.8 lbs
1.1 - 1.7 lbs
PET
Loop Tack:
Peel Adhesion:
3.6 - 4.2 lbs
2.6 - 3.2 lbs
Glass
Loop Tack:
Peel Adhesion:
2.6 - 3.2 lbs
1.6 - 2.2 lbs
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
n/a
Caliper:
0.00118 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
n/a
Total Construction Caliper
(approximate):
0.00448 inches
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511