Print this Page
Fasson® Tire Label II /TL2/40#SCK
Spec# 00512
Facestock:
Fasson® Tire Label II is a latex impregnated paper with a barrier coating on the adhesive side of the facestock. This facestock prints fair with water and solvent based flexo, screen and offset ink systems. Not recommended for letterpress or printing with UV ink systems. Fair printability with impact printers.



Basis Weight:
70# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0039 inches ± 10%


Tensile:
MD 26# per inch width
CD 16# per inch width


Tear:
MD 50 grams
CD 50 grams


Stiffness:
MD 150 mg
CD 60 mg
Adhesive:
Fasson® TL2 is a highly aggressive permanent adhesive. This adhesive also provides excellent performance on difficult-to-label substrates, such as wood and carpet backing. Not recommended for diecutting and stripping. Maximum recommended roll length is 2,500 feet due to adhesive ooze concerns.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+35° F


Service Temperature Range:
-65° F to +150° F
Typical Performance Data: 60# C2S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

7.0 lbs
3.9-4.6 lbs

Treated HDPE
Loop Tack:
Peel Adhesion:

5.0 lbs
3.3-3.7 lbs

Treated LDPE
Loop Tack:
Peel Adhesion:

5.8 lbs
3.4-4.1 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

6.2 lbs
3.5-4.1 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

4.7 lbs; pulled fiber
2.3-2.8 lbs; pulled fiber
Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
42.40# per ream, ± 10%
(500 sheets 24" x 36")


Caliper:
0.00244 inches ± 10%


Tensile:
MD 39.70# per inch width
CD 14.70# per inch width


Tear:
MD 34.70 grams
CD 41.80 grams
Total Construction Caliper (approximate): 0.00810 inches ± 10%

Note:  This product is recommended for butt-cut, hand-applied labels.  Maximum recommended roll length is 2,500 feet due to potential for adhesive ooze.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511