Print this Page
Fasson® 2.3M White BOPP TC/S692N/Ultraliner
Spec# A9938 - REV 8/2021 TC2000 - RESTRICTED
Facestock:
Fasson® 2.3 Mil White BOPP TC is a heat-set, biaxially-oriented, co-extruded polypropylene film, with good opacity and a bright white high gloss background.   Avery Dennison's TC-2000 topcoat is suitable for printing by UV inkjet, UV letterpress and Flexographic UV, solvent and water-based inks. Not recommended for thermal transfer printing. This topcoated facestock has excellent moisture resistance, and good diecutting and dispensing characteristics. Use caution when applying inks out to the edge of the label, particularly UV cured inks and varnishes. High shrinkage coatings can cause labels to lift off the liner and/or substrate.



Basis Weight:
N/A


Caliper:
0.0023 inches ± 10%


Tensile:
MD 18,500 psi
CD 35,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs

Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs










Liner:
Fasson® Ultraliner® is an extruded polyolefin film liner designed primarily for high-speed dispensing applications. The high tensile strength of Ultraliner® virtually eliminates web breaks in high-speed dispensing applications.



Basis Weight:
n/a


Caliper:
0.0024 inches ± 10%


Tensile:
MD 32,000 psi
CD 4,300 psi


Tear:
n/a
Total Construction Caliper (approximate): 0.00550 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511