Print this Page
Fasson® PRIMAX 250/S2300/1.2M PET
Spec#
79502 - OBSOLETE 1/12/18
Facestock:
Fasson® PRIMAX® 250 is a corona-treated, flexible, opaque white polyolefin film with exceptional dimensional stability for use in a wide range of applications, including prime label. Printable by web screen, UV letterpress, flexo solvent, and water-based inks. In-line corona treatment will greatly expand the number of inks which can be used. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be diecut and stripped at high speeds on standard web-fed presses using typical film tooling. Excellent dispensability with direct comparison to white Opticite* and better performance over clear MDPE and clear flex vinyl.
Opticite* is a trademark of The Dow Chemical Company.
Basis Weight:
N/A
Caliper:
0.0025 inches ± 10%
Tensile:
MD 17,200 psi
CD 2,300 psi
Tear:
N/A
Stiffness:
MD 20 mg
Adhesive:
Fasson® S2300 is a permanent solvent acrylic adhesive offering high shear and excellent resistance to oils and fragrances.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F (10C)
Service Temperature Range:
-40° F to +350° F (-40 to +177° C)
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
2.3 lbs
2.8 lbs
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00448 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511