Print this Page
Fasson® Primax® 250/Z3000/40#SCK
Spec# 79378
Facestock:
Fasson® PRIMAX® 250 is a corona-treated, flexible, opaque white polyolefin film with exceptional dimensional stability for use in a wide range of applications, including prime label. Printable by web screen, UV letterpress, flexo solvent, and water-based inks. In-line corona treatment will greatly expand the number of inks which can be used. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be diecut and stripped at high speeds on standard web-fed presses using typical film tooling. Excellent dispensability with direct comparison to white Opticite* and better performance over clear MDPE and clear flex vinyl.

Opticite* is a trademark of The Dow Chemical Company.



Basis Weight:
N/A


Caliper:
0.0025 inches ± 10%


Tensile:
MD 17,200 psi
CD 2,300 psi


Tear:
N/A


Stiffness:
MD 20 mg
Adhesive:
Fasson® Z3000 is a removable adhesive which meets the requirements of FDA 175.105 and FDA175.125B. This adhesive is specially designed for adhesion to fresh fruits and vegetables with edible skin. This adhesive does not meet the requirements of FDA 21 CFR 175.125A for direct food contact.



Type:
Hot Melt Rubber


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: N/A


























Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
42.40# per ream, ± 10%
(500 sheets 24" x 36")


Caliper:
0.00244 inches ± 10%


Tensile:
MD 39.70# per inch width
CD 14.70# per inch width


Tear:
MD 34.70 grams
CD 41.80 grams
Total Construction Caliper (approximate): 0.00574 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511