Print this Page
Fasson® High Gloss+/UR3/40#SCK
Spec# 53421-OBSOLETE
Facestock:
Fasson® High Gloss+ is a bright blue-white cast-coated gloss paper featuring high strength and excellent ink receptivity. Prints well with flexo, letterpress, screen, and offset methods using non-UV ink systems. This product is suitable for use in a wide variety of applications where high quality printing is critical.



Basis Weight:
60# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0040 inches ± 10%


Tensile:
MD 30# per inch width
CD 17# per inch width


Tear:
MD 70 grams per sheet
CD 65 grams per sheet


Stiffness:
MD 125 mg
CD 65 mg
Adhesive:
Fasson® UR3 is an ultra-removable adhesive featuring a consistent level of adhesion, as well as long term removability and repositionability across a wide variety of substrates. Should be tested for suitability on curved surfaces. Fasson® UR3 remains removable for months, and labels can be removed and re-used several times.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+20° F


Service Temperature Range:
-40° F to +160° F
Typical Performance Data:


Stainless Steel
Loop Tack:
Peel Adhesion:

.57 lbs.
.29 lbs.

Treated HDPE
Loop Tack:
Peel Adhesion:

.60 lbs.
.26 lbs.

Corrugated
Loop Tack:
Peel Adhesion:

.75 lbs.
.31 lbs.

PET
Loop Tack:
Peel Adhesion:

.90 lbs.
.22 lbs.





Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
42# per ream ±10%
(500 sheets 24" X 36")


Caliper:
0.0025 inches ±10%


Tensile:
MD 38# per inch width
CD 20# per inch width


Tear:
MD 36 grams
CD 41 grams
Total Construction Caliper (approximate): 0.0073 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511