Print this Page
Fasson® 2 Mil Clear Polystyrene/C2510/50#SCK
Spec# 78057
Facestock:
Fasson® 2 Mil Clear Polystyrene is a versatile thermoplastic resin, corona treated to assist in printability. The film stiffness allows for easy converting and dispensing



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 15,000 psi
CD 28,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® C2510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass, and corrugated cardboard. C2510 was engineered specifically for cold, damp environments typical of dairy environments. C2510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive could occur.



Type:
Hot melt rubber


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 50# Dairy Label at room temperature on standard lab panels


HDPE
Loop Tack:
Peel Adhesion:

3.2 lbs
1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.7 lbs
1.6 lbs

Corrugated
Loop Tack:
Peel Adhesion:

1.5 lbs
1.6 lbs










Liner:
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
55# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 52# per inch width
CD 24# per inch width


Tear:
MD 46grams
CD 56 grams
Total Construction Caliper (approximate): 0.0060 inches ±10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511