Print this Page
Fasson® CopyCodeTM II White Polyester/I406K/50#SCK ABC
Spec# 73448
Facestock:
Fasson® CopyCode™ II White Polyester is a matte white polyester film featuring a specially designed topcoat suitable for high speed impact printing operations and enhanced flexographic printability. Recommended for indoor or outdoor use where maximum abrasion resistance is required. The special coating is less abrasive than standard CopyCode™ Polyesters.



Basis Weight:
N/A


Caliper:
0.002 inches ± 10%


Tensile:
MD 22,000 psi
CD 23,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® I406K is a clear, aggressive rubber based permanent adhesive with high initial tack and ultimate adhesion to a wide variety of substrates. Fair chemical and UV resistance.



Type:
Solvent Rubber


Minimum Application Temperature:
+40° F


Service Temperature Range:
-40° F to +200° F
Typical Performance Data: Tested with 2 Mil Clear Polyester at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

9.2 lbs
5.9 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
6.1 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
6.1 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.2 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs
Liner:
50#SCK is a bleached, super calendered paper stock with very good diecutting and matrix stripping properties. Supplied with an anti-block coating ("ABC") on the backside of the liner. ABC controls adhesive and label transfer to the backside of the liner in finished, wound rolls. This liner should not be used in fanfolded label applications, and is not recommended for back printability.



Basis Weight:
54# per ream ±10%
(24 "x 36" 500 sheets)


Caliper:
0.0032 inches ± 10%


Tensile:
MD 48# per inch width
CD 26# per inch width


Tear:
MD 50 grams
CD 58 grams
Total Construction Caliper (approximate): .0059 inches ± 10%

Note: Back of liner has ABC ("anti-block coating") which makes construction unsuitable for fanfolded label applications.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511