Print this Page

Fasson® Estate Label® #8 FSC/S100R/44#PK
Spec# 02394
Facestock:
Fasson® Estate Label® #8 FSC is a 60# wet strength bright white vellum paper that provides a printed appearance ideal for wine, high-end beverages and gourmet foods. This product is supplied with Forestry Stewardship Council (FSC) certification to support your chain of custody.

Estate Label is a registered trademark of Neenah Paper, Inc.




Basis Weight:

60# per ream ± 10%
(500 sheets 25" x 38")


Caliper:

0.0047 inches ± 10%


Tensile:

MD 15# per inch width
CD 8# per inch width


Tear:

MD 50 grams per sheet
CD 58 grams per sheet


Stiffness:

N/A

Adhesive:
Fasson® S100R is a permanent adhesive which is removable in minimum 100° F water. Developed with good initial tack and ultimate adhesion, S100R can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100° F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, or as long as 5 minutes. Where removal is required, this adhesive is recommended for use on HDPE, polypropylene, poly vinyl chloride (PVC), polyester, Lexan®, stainless steel, and glass. We do not recommend it for use with film facestocks (i.e., polypropylene, polystyrene), due to a potential surface interaction which could cause the loss of water removability. This adhesive exhibits excellent diecutting and stripping properties.

FDA Compliance:  Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105).  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

Lexan® is a registered trademark of General Electric Company.




Type:

Emulsion Acrylic


Minimum Application Temperature:

+20° F


Service Temperature Range:

-65° F to 200° F


Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:


2.6 lbs
1.8 lbs - Tear


HDPE
Loop Tack:
Peel Adhesion:


1.6 lbs
1.1 - 1.6 lbs


PET
Loop Tack:
Peel Adhesion:


2.6 lbs
1.2 lbs -Tear


Glass
Loop Tack:
Peel Adhesion:


2.7 lbs
1.9 lbs -Tear






Liner:
44#PK is a poly-coated natural kraft (brown) paper stock for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. Features good back printability.



Basis Weight:

43.5# per ream ±10%
(24"x36" 500 sheets)


Caliper:

0.0031 inches ± 10%


Tensile:

MD 35# per inch width
CD 20# per inch width


Tear:

MD 35 grams
CD 50 grams

Total Construction Caliper (approximate): 0.0086 ± 10%

Applications and Uses
This product is suitable for use in a wide variety of prime labeling applications where facestock appearance is critical, especially wine labeling applications. Fasson® S100R adhesive can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100°F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, but might be as long as five minutes. Where removal is required, S100R is recommended for use on HDPE, PVC, PET, Lexan®, stainless steel, and glass. It is not recommended for use on polypropylene or polystyrene, due to a potential surface interaction which could cause the loss of water removability.

Shelf Life
Unless specified otherwise in this document, one year when stored at 72°F at 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at www.na.fasson.com. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511