Print this Page
Fasson® 1 Mil Clear PET Ultra High Barrier/R1350/1.2 Mil Polyester
Spec#
TBD - RESTRICTED Ultra High Barrier/R1350
Facestock:
Fasson® 1 Mil Clear PET Ultra High Barrier is a transparent polyester film designed for semi-rigid reclosure applications which require high moisture and oxygen barrier. The print surface is designed for UV flexo and flexographic printing using solvent and water based inks.
An AlOx barrier coating is applied to the adhesive side of the facestock, providing improved oxygen and moisture barrier necessary for reclosure food packaging. A typical oxygen transmission rate is 0.13 cc/100 sq. in./24 hrs. at 23°C / 0%RH and a typical moisture vapor transmission rate is 0.13 g/100 sq. in./24 hrs. at 23°C / 90%RH.
Basis Weight:
N/A
Caliper:
.00094 inches +/- 10%
Tensile:
MD 27,000 psi
CD 28,500 psi
Tear:
Stiffness:
Adhesive:
Fasson® R1350 is a specially formulated low-odor acrylic adhesive with a smooth, low-noise peel. Excellent water whitening resistance and ultra low peel strength combine to make this adhesive ideal for use in heat sealable reclosure applications such as leafy greens where there is a large amount of moisture present. The R1350 complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components into the food; or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F
Service Temperature Range:
-40° F to + 250° F
Typical Performance Data:
2.0 mil Clear BOPP at room temperature on standard lab panels, unless otherwise noted.
Stainless Steel
Loop Tack:
Peel Adhesion:
0.4 lbs
0.3 lbs
PET Flow Wrap
Loop Tack:
Peel Adhesion:
0.5 lbs
0.4 lbs
Liner:
Fasson® Clear Polyester film liner, heat sealable on one side including an anti-fogging agent for moist environments. The heat sealable layer is designed to heat seal onto itself or substrates such as APET, CPET, modified CPET and PET. Fitness for use testing required to ensure the heat sealable layer adheres to the specific tray material used. The heat seal film exhibits a broad sealing temperature range of 260° F to 410° F. Complies with 21 Code of Federal Regulations (CFR) 177.1630 (F), (G) and (H) for direct food contact.
Heat Seal Strength: 855 grams/inch (Film/Film @ 248° F, 31PSI, 1 Second)
Basis Weight:
N/A
Caliper:
0.00118 inches ± 10%
Tensile:
MD 28,000psi
CD 31,000psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00292 inches +/- 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511