Print this Page
Fasson® Direct-Therm 200GP/C2510/40#CK
Spec# 18468 - OLD
Facestock:
Fasson Direct-Therm 200GP is a smooth bright white paper with a medium-sensitivity thermal coating, specifically designed to resist a variety of contaminants in the Grocery and Industrial labelling markets including water, blood, fat, PVC's and oils. Direct-Therm 200GP is designed to run through a wide range of printers, at moderate speeds or low printhead voltages. The non-corosive, non-abrasive surface provides for maximum printhead life.



Basis Weight:
49# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0030 inches ± 10%


Tensile:
MD 25# per inch width
CD 15# per inch width


Tear:
MD 50 grams per sheet
CD 60 grams per sheet


Stiffness:

Adhesive:
Fasson® C2510 is a rubber-based adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, glass, and corrugated cardboard. C2510 was engineered specifically for cold, damp environments typical of dairy environments. C2510 has very good high speed/wide web converting characteristics. This adhesive is suitable for applications which require compliance with FDA 175.105. This section covers applications where incidental contact between food and the adhesive could occur.



Type:
Hot melt rubber


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: 50# Dairy Label at room temperature on standard lab panels


HDPE
Loop Tack:
Peel Adhesion:

3.2 lbs
1.8 lbs

LDPE
Loop Tack:
Peel Adhesion:

2.7 lbs
1.6 lbs

Corrugated
Loop Tack:
Peel Adhesion:

1.5 lbs
1.6 lbs










Liner:
40#CK liner is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.1# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0024 inches ± 10% target


Tensile:
MD 35.6# per inch width target
CD 13.9# per inch width target


Tear:
MD 34.3 grams target
CD 44.7 grams target
Total Construction Caliper (approximate): 0.0063 inches ± 10%


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511